New generation Scania R-series and S-series: used buying guide

Lucy Radley
September 25, 2019

Jump to: Road test, Vehicle specifications, About Keltruck.

Click here to view the full range of used Scania R-series tractor units we have in stock.

Click here to view the full range of used Scania S-series tractor units we have in stock.

Keltruck Newark’s sales boss Russell Barnes knows what he’s talking about – he has first-hand experience.

Scania dealer Keltruck’s fledgling used operation at Newark has a surprise secret weapon. When asked what is different about this set-up the salesman running it has a simple answer: “Me.” A live wire, Russell Barnes is only in his mid-30s, but he knows his stuff and how to get things done at “transport speed” – very quickly indeed.

Originally we arranged to visit Newark to drive a tipper, but a few days before our visit, we spotted a pretty stunning 18-plate new generation R450 6x2 tractor unit advertised in the back of CM. One phone call later, it was ours to drive, complete with a trailer loaned at zero notice from a local contact.

Impressive work, but by no means a one-off. We’ve since learned of other rabbits being pulled out of hats – such as the guy who needed a new tractor at two weeks’ notice after a misunderstanding with a franchisor. The production line waiting time was around 12 months. A fortnight later a less-than-six-months-old demonstrator had been pulled off the road, prepped to spec and delivered. The customer has since bought another one, purely because that sale was so well handled.

To truly understand the needs of a transport man you have to have walked in his shoes, which is what Barnes has done – he’s an ex-lorry driver of 13 years’ experience, the latest generation in a long line of truck drivers. Even his mother works in a transport office.

Barnes came to Keltruck via another sales job, obtained through an industry friend after struggling to get off the road with a CV that just said “driver”. Talk to the man about any kind of haulage you choose and he understands what you need because if he hasn’t done it himself he knows someone who has.

He also comes without the usual preconceptions of how the selling of used trucks should be done. “I spent a bit of time working with Mitch Gough [Keltruck used vehicles sales manager] at West Brom while they finished off preparing the building here, and I picked up on what the new and used guys do,” says Barnes.

“Don’t get me wrong,” he continues. “Some customers are more... salt of the earth, shall we say, and that’s fine. But then you also get those coming in at the bottom end of the market who want the ‘royal’ touch, so that’s what they get.” He stays in touch with customers after they’ve made their purchase. “I speak to most on a weekly basis and I’ve even got one I go out with. It’s not just a case of ‘call me if there’s a problem’.”

Whether he mentions his past, however, is dependent on who he’s talking to and whether he thinks it will help or hinder his credibility. “It might come up if they ask about my experience directly, and why I think a particular truck is great, for example,” he says. “But I don’t push it. It’s something that’s there as back-up almost.” This real-life knowledge shines through when we start to talk about our test vehicle. “It’s six months old and has covered about 20,000km as one of 10 spare units we keep available as part of a 300-plus vehicle contract, in case they have a VOR, for example,” says Barnes. “So the vehicles don’t depreciate too much, every six months when there’s a new registration we put a new batch in, giving us 10 low-mileage used trucks.”

In the case of such young vehicles, all damage is rectified, returning each vehicle to mint condition before it leaves the Newark yard.

The price difference isn’t that great. Basically, you’re getting a small discount on new, based on losing six-months’ worth of the initial R&M – so we wonder what the attraction is.

Actually, it’s already gone – the recent batch sold within 17 days of being withdrawn from service. “One of them has gone to a container driver with three vehicles – I’d already sold him a 67-plate and I’ve just sold him an 18-plate,” says Barnes. “He used to run a different marque and reckons the fuel economy improvement and saving in AdBlue usage is basically going to pay for another one.”

At Newark they can repaint, rewire, refit and generally titivate any choice of used truck. Lightbars, microwaves, tail-lifts and wet kits are no problem, although the latter will be fitted by Keltruck’s specialist division at Willenhall. They also check everything before sale, and deliver vehicles to new owners valeted and washed down, with a three-month driveline warranty for those that have reached the end of their initial manufacturer’s R&M deals. And if you want another three identical motors to go with your new acquisition, it will do its best to facilitate that as well.

(Back to top)

Road test

This is the first chance we’ve had to play in a used new generation Scania, so we’re looking forward to it. Hopping into the cab of the R450, the difference is obvious. This example boasts a premium dash, with built-in satnav and digital dials for rpm and speed. The whole thing has a smooth look and feel, with flat buttons rather than switches for the various auxiliaries. Overall, the impression is of a far classier vehicle than a 44-tonne truck.

Barnes gives a quick rundown of the more immediately useful controls – he does actually know what is immediately useful, unlike some who’ve taken great care over showing us the diff lock on a distribution rigid, for example, while we’ve sat and forgotten where the wipers are – and within a refreshingly short time we’re away.

Our trailer is an empty tanker so there’s no point hunting for hills. Instead we opt for a circular route taking us out of Newark via the ring road and A46, east across the A52 to Grantham then back up the A1. As ever, to start with we drive in the manner of the lowest common denominator, pointing the thing in vaguely the right direction and planting our right foot. Nothing very interesting happens. The 13-litre engine simply pulls away and drives. No over-revving, no loss of traction as we pull out onto the first roundabout despite being empty with a shallow-pinned trailer, no snatching of the brakes, nothing. We do pull up a little sharply to start with, but that’s because we knock the exhaust brake on instead of indicating right. Suffice to say it works very well, even at low revs.

One thing we can’t help noticing is that the cab appears to be leaning forward. It takes a while to put our finger on what feels unusual, but once we think we’ve worked it out we confirm our observation with Barnes, who immediately knows what’s happening. We have the mid-lift up, and because there’s no real weight over the fifth wheel the lift in the suspension needed to avoid it knocking on the floor on speed-bumps is more obvious than we’re used to – we normally pull fully freighted test trailers.

Making a little more effort to work with the technology, we play with the revs and find this latest incarnation of Opticruise far more amenable to subtle instruction through the throttle than previous models, although – as Barnes reminds us – this is a “learning” gearbox that adapts to how it is driven. He always resets these when they come into his stock, where other dealers might not.

We flick between Eco, Standard and Power profiles, but without any weight behind us it’s hard to tell the difference – the ECU isn’t chucking around unnecessary power regardless of how hard we try to make it, which is probably why the fuel returns are so good on these trucks. We do find it a little hard to see the green band on the rev counter, replaced as it is by a far less visually intrusive and muted set of lights, but we’re told we can reset it to a more traditional view should we prefer – probably unnecessary given time to get used to the unfamiliar view.

Those specifics aside, our overriding impression is one of complete effortlessness. Empty artics so often feel a bit unstable, but there is none of that with this tractor, which feels sure-footed throughout the drive. The ride is as smooth as the interior fascia, and the 450hp available under firm control no matter how many tricks we try to play on it.

By the end of our short trip we are confirmed new generation Scania fans, and happily declare any driver who moans about being given one of these to be in need of being forced to drive a 1978 Foden for a while. Buy it from Keltruck at Newark, and not only will you effectively get a new vehicle without having to wait for months, you’ll get to meet a very nice bloke along the way.

“You should leave here happy, whether you’ve bought a truck or not,” says Barnes. “Customers are people, after all. So we need to just... be human!”

(Back to top)

About Keltruck

Keltruck has been in business for 35 years and is now Britain’s biggest independent Scania dealer. It has 19 sites across the East and West Midlands and south Wales, 17 of them dealer points. Used vehicles are sold from three sites – Newark, Cross Hands in Wales, and the head office at West Bromwich – although enquiries can be dealt with at any location.

It was founded in 1983 by Chris Kelly, who remains the company’s largest individual shareholder, while his son, Chris D Kelly, is chairman. The Newark depot became part of Keltruck when it acquired East Midland Commercials in 2004, and has recently undergone an extensive upgrade and refurbishment to provide new offices and customer facilities, including the reintroduction of dedicated used sales.

(Back to top)

Click here to view the full range of used Scania R-series tractor units we have in stock.

Click here to view the full range of used Scania S-series tractor units we have in stock.

About the Author

img

Share this article

axle
bodytype
cabtype
Emissions
Vehicle Type
make
model
;