Used Scania P Series Tipper: 11 issues to look out for

scania p series tipper used buying guide

Click here to view all of the used Scania P Series tippers we have in stock.

Scania vehicles, and particularly Scania rigids, always present a challenge when it comes to finding points used buyers should look out for. Scania prides itself on reliability, after all, and the fact that it is a struggle to identify faults backs that up. Indeed, several operators told us it was precisely because they never had any problems with their Scania 8x4s that they kept on buying them, one going on to say: “You pay a lot more up front but the uptime is unbelievable – no ABS faults, no broken springs, no chewing through brakes or anything.”

Bearing this in mind, here are the issues we have been alerted to, some of which, in fairness, are more to do with used tippers in general.

scania p series tipper used buying guide

1. Tipping body floor

Tipping body floors need particularly close inspection to ascertain whether they need to be replaced – or whether they have been already – especially if the bodybuilder in unclear. Problems in this area not uncommon once vehicles reach five to seven years old, depending on what they have been doing.

scania p series tipper used buying guide

2 Mirror arms

­In common with other P-series trucks, older examples with aluminium mirror arms are vulnerable to corrosion, resulting in the mirrors themselves rattling around.

scania p series tipper used buying guide

3 Brackets

Quality of brackets used by bodybuilders to attached side guards etc varies considerably, some being far better than others. Best to check before purchase.

scania p series tipper used buying guide

4 Gearbox

The gear linkages and universal joints are prone to failure in models fitted with manual gearboxes.

5 Electrics

Reports of odd pairs or batches of trucks as recent as 16-plate needing ECUs, or generally having “unreliable electrics”. Check history where possible – vehicles that have had these problems tend to keep having them.

scania p series tipper used buying guide

6 Second steer pivot bushes

Trucks on muck-away or quarry work sometimes show problems with second steer pivot bushes if drivers forget to regularly grease them. Close monitoring recommended.

scania p series tipper used buying guide

7 Steering idler arm

Steering idler arm prone to problems due to lack of grease, caused by awkward positioning, which means it often gets missed.

scania p series tipper used buying guide

8 Shackle pins

Along similar lines, the shackle pins close to the exhaust sometimes cause issues as their position means that the grease is melted out by the heat.

scania p series tipper used buying guide

9 AdBlue

Generalised AdBlue faults, including pump issues, NOx sensors and erroneous warning lights displaying on the dashboard.

scania p series tipper used buying guide

10 Diffs

Examples of diffs needing replacement once vehicles reach four to five years old if they have been on particularly rough work.

scania p series tipper used buying guide

11 Software

As with many vehicles used in the construction sector, 8x4 tippers are often maintained in-house by operators and never see a Scania dealership. It is, therefore, vitally important to ensure that all software updates have been done and to continue to present the truck for further updates from time to time.

MAN TGS 26.440 with rear lift - Used Truck of the Day

This 26-tonner has an infilled catwalk, Kelsa HiBar with spotlights, as well as beacons and work lights.

It has a heavy duty bumper fitted along with a high sleeper cab with single bunk.

It’s being sold by A&M Commercials and you can see more details here.