Allison introduces new fuel economy transmissions
Allison Transmission has introduced two new versions of its xFE fully automatic transmission for use in medium-duty trucks.
The 3000 xFE and 3200 xFE models are designed for engines producing up to 370hp and 1695Nm of torque and with a gross vehicle weight of up to 28.5 tonnes.
The xFE (which stands for “extra fuel economy”) models are claimed to reduce CO2 emissions by up to 3.7% compared to the standard 3000 and 3200 Series transmissions. Greater gains are said to be made at speeds below 20mph, depending on the vehicle’s axle ratio, and above 45mph.
“Truck fleet operators everywhere are under legislative pressure to reduce emissions, and of course all fleets would like to reduce their fuel costs. These new xFE transmissions could be a critical tool in helping OEMs and fleets make a 15% CO2 emission reduction by 2025 and 30% by 2030, as required by EU CO2 emissions standards for heavy-duty vehicles. Doing much more with today’s efficient diesel technology is an affordable and environmentally-responsible stepping stone on the path towards electrification and other non-fossil fuel propulsion systems for which we also have suitable propulsion solutions,” said Sjoerd Vos, Allison Transmission director of EMEA marketing.
The xFE gearboxes improve fuel economy by enabling the engine to spend more time in higher ranges and at lower rpms. Allison say the 3000 xFE and 3200 xFE lock up in first gear rather than second, making the final overdrives deeper, improving the spread of gear ratios from 5.37 to 5.91. The 3000 xFE and 3200 xFE are available with or without a retarder and come with Allison’s FuelSense 2.0 package of smart controls which include Neutral at Stop, to reducing engine load when stationary, Acceleration Rate Management to mitigate aggressive driving by controlling engine torque and DynActive Shifting which alters gear shift points according to factors such as vehicle weight, road gradient, stop-start frequency, and throttle use.
Derbyshire-based Ward specifies Commercial Vehicle Hydraulics wet kits on its new DAF, Scania and Volvo tippers
Metal and and waste recycling specialist Ward has specified Commercial Vehicle Hydraulics (CVH) wet kits on 12 of its new tippers.
The order is part of a £2m upgrade the Derbyshire-based company is making to its 120-strong truck fleet, and consists of a mix of DAF, Scania and Volvo rigids and artics.
Donald Ward, operations director at Ward, said: “This is another significant investment and commitment to our ongoing sustainability strategy. We continually review our fleet, moving out older vehicles and bringing in more efficient replacements.”
Carl Hinds, MD at Commercial Vehicle Hydraulics added: “We’re delighted that Ward Recycling has once again chosen CVH for their latest 12 tipper wet kits. With their trucks often having to carry irregular payloads, this is the ideal solution for hydraulic power to tip the load.”